Филипс Эланс 3100 инструкция

Картинка

Добавил: admin
Формат файла: RAR
Оценка пользователей: Рейтинг (4,2 из 5)
Дата добавления: 20.11.2017
Скачиваний: 1652 раз(а)
Проверен Dr.Web: Вирусов нет

Скачать

Краткая рецензия на «Филипс Эланс 3100 инструкция»

  • ООО и ИП при УСН Элвес МФ.
  • Hotpoint-Ariston 7OFTR и FT 850.
  • When this happens you may hear a sound.

The built-in Anti-Calc system reduces the build-up of scale and guarantees a longer life for the iron. The automatic shut-off function automatically switches off the iron if it has not been moved for a while. The red auto-off light flashes to indicate that the iron has been switched off by the automatic shut-off function. To let the iron heat up again: Pick up the iron or move it slightly.

The red auto-off light goes out. If the temperature of the soleplate has dropped below the set ironing temperature, the temperature light goes on. Note: If the temperature light does not go on after you move the iron, the soleplate still has the right temperature and the iron is ready for use. To keep the soleplate smooth, avoid hard contact with metal objects.

Never use a scouring pad, vinegar or other chemicals to clean the soleplate. 3 Clean the upper part of the iron with a damp cloth.

4 Regularly rinse the water tank with water. Empty the water tank after cleaning. Calc-Clean function You can use the Calc-Clean function to remove scale and impurities. Use the Calc-Clean function once every two weeks.

Calc-Clean function more frequently 1 Set the steam control to position 0, remove the plug from the wall socket and let the iron cool down. 2 Fill the water tank to the maximum level.

Do not pour vinegar or other descaling agents in the water tank. 3 Set the temperature dial to the maximum temperature.

Информация

4 Put the mains plug in an earthed wall socket. 5 Unplug the iron when the temperature light goes out. 6 Hold the iron over the sink, press and hold the Calc-Clean button and gently shake the iron to and fro. Steam and boiling water come out of the soleplate.

7 Release the Calc-Clean button when all the water in the tank has been used up. 8 Repeat the Calc-Clean process if the iron still contains a lot of impurities. After the Calc-Clean process 1 Put the plug in the wall socket and let the iron heat up to allow the soleplate to dry.

2 Unplug the iron when the temperature light goes out. ENGLISH 9 3 Move the hot iron gently over a piece of used cloth to remove any water stains that may have formed on the soleplate. 4 Let the iron cool down before you store it. Чистим утюг — Все буде добре — Выпуск 491 — 05.